You are here: Home » Sharpeners » Polycrystalline Diamond Emulsion » Diamond Emulsion Spray - 8ml 0.5 Micron

Diamond Emulsion Spray - 8ml 0.5 Micron

  • HYD-YMY0.5

  • HUAYIDA

  • Polycrystalline Diamond Emulsion

  • 4"LX4"WX0.63"H(102 × 102 × 16MM)

  • Diamond Abrasive Emulsion

  • Paper Box

Specification:
Availability:

Product Description

Diamond Emulsion Spray Description & Features


Huayida Diamond Emulsion Sprays are meticulously formulated for professionals who demand absolute precision, speed, and reliability throughout the knife and tool sharpening process. Engineered to deliver aggressive yet controlled material removal, these emulsions produce a clean, refined edge with a mirror-like polish—ideal for both intermediate refinement and final-stage stropping.


Unlike conventional diamond sprays, Huayida’s Diamond Emulsion Spray features a viscous, high-concentration suspension of premium-grade polycrystalline diamond particles, offering significantly more abrasive density per application. This translates into faster performance and longer-lasting abrasive action.


What sets polycrystalline diamond apart is its fractured, multi-faceted microstructure. Unlike monocrystalline diamonds, which have smoother surfaces and fewer cutting points, polycrystalline particles expose a higher number of sharp, angular edges, enabling more effective micro-abrasion on the strop. Furthermore, their friable nature allows them to continuously break down into fresh, ultra-sharp fragments during use, extending their cutting potential and improving surface finish at every pass.


Recommended Strop Pairings:

  • Premium leather strops (cowhide or kangaroo)

  • Balsa wood strops for ultra-flat backing

  • Nano-Cloth strops, which maximize abrasive contact and consistency


Huayida Diamond Emulsion Sprays are the preferred solution for professionals sharpening kitchen knives, outdoor blades, and woodworking tools such as chisels and plane irons—where edge integrity, cutting clarity, and finishing brilliance are paramount.



Product Parameters


Item
Model NO. Grit Type
HYD-YMY4 4 micron / ~4K grit
HYD-YMY2 2 micron / ~8K grit
HYD-YMY1 1 micron / ~16K grit
HYD-YMY0.5 0.5 micron / ~30K grit
HYD-YMY0.25 0.25 micron / ~60K grit
HYD-YMY0.1 0.10 micron / ~160K grit



Information
Manufacturer Huayida
Material Diamond Abrasive Emulsion
Product Name Diamond Emulsion Sprays
Size 4"LX4"WX0.63"H(102 × 102 × 16MM)
Weight 17G/Pcs
Package 53X44X14 CM
9.00/7.50KGS/CTN
400PCS/CTN


Use&Features

Uses and Features


  • How to Use


  1. Shake well before use to ensure even diamond dispersion.

  2. Apply a small amount (1–2 pumps) directly onto your strop surface.

  3. Spread evenly across the strop using a clean finger, cotton swab, or plastic card.

  4. Allow to dry completely before stropping (usually a few minutes).

  5. Strop as usual, maintaining light, consistent pressure for optimal results.

Recommended for use on: Leather, Kangaroo Leather, Balsa Wood, and Nano-Cloth strops.



  • Key Features


  • Polycrystalline Diamond Structure
    Features multi-faceted, friable particles that break into fresh, sharp edges during use—delivering faster cutting and a finer finish than monocrystalline alternatives.


  • High-Concentration Formula
    Viscous emulsion with a high diamond particle density ensures long-lasting, consistent abrasive action with every application.


  • Superior Surface Finish
    Produces refined, mirror-polished edges ideal for kitchen knives, outdoor blades, and fine woodworking tools (chisels, plane irons).


Application

Diamond Emulsion Spray — Expert-level Optimization

Below is a tighter, more technical and market-ready version written from an industry expert’s perspective. It keeps practical shop guidance and the performance reasoning that professionals need to choose, apply and specify a diamond emulsion spray.


Executive summary

Diamond emulsion sprays are low-viscosity suspensions of micron/sub-micron diamond abrasives in a carrier fluid. When used on diamond plates, laps or coated tools they provide a controlled micro-abrasion that improves cutting efficiency, reduces glazing and produces highly repeatable edge and surface finishes across hard substrates (HSS, tungsten carbide, ceramics, glass). Proper selection and application of an emulsion spray delivers measurable gains in finish quality and process throughput while reducing operator variability.


Technical applications (expert view)

  • Edge refinement and finishing of cutting tools — final honing of knives, shears, planer blades and razor edges to reduce burr formation and increase edge retention.

  • Tool reconditioning and light stock removal — touch-up of endmills, taps and carbide inserts where minimal material removal and precise geometry control are required.

  • High-hardness substrates — controlled dressing and micro-truing of tungsten carbide, ceramics and glass tooling with minimal heat build-up.

  • Precision polishing — final-stage finishing for lapidary, jewelry, optical parts and semiconductor components where surface roughness and micro-topography are critical.

  • Diamond plate conditioning — periodic use to dislodge embedded debris and restore cutting action without aggressive mechanical dressing.

  • Production repeatability — where consistent surface roughness, Ra, or mirror finish is a spec, sprays enable tighter within-batch variance than ad-hoc pastes or aqueous slurries.


Advantages — why spec an emulsion spray

  • Uniform micro-abrasion with low operator variance — spray delivers a thin, evenly distributed film vs manual paste application.

  • Cleaner process, faster throughput — lower viscosity allows chips and swarf to be carried away more easily, reducing glazing and downtime.

  • Lower thermal load — thin film and small abrasive particles reduce frictional heating versus coarse slurries, preserving tool temper and substrate integrity.

  • Better for fine finishing — ultrafine abrasives in emulsions produce superior optical or cutting-edge finishes compared with coarse grit pastes.

  • Easier maintenance — simple application and rinse cycles reduce shop cleanup and contamination of downstream processes.


Practical selection & matching guidance

  • Match abrasive grade to task — use coarser micro-abrasives or gels for light stock removal; choose ultrafine (sub-micron to low-micron) emulsions for final polishing or optical finishes. (Exact particle size varies by manufacturer — consult the product datasheet.)

  • Compatibility — confirm carrier fluid compatibility with plate binder materials and tool coatings; some carriers can affect polymer/epoxy bonding on resin-bond plates.

  • Viscosity & residue — select low-residue formulations for precision optics or electronics; choose slightly more viscous blends if you need the emulsion to cling longer on vertical surfaces.


Best-practice application (shop protocol)

  1. Surface prep — remove heavy swarf and clean plate with a brush or solvent recommended by the plate manufacturer.

  2. Resuspend — shake the bottle thoroughly to re-disperse abrasive particles.

  3. Thin, even coverage — apply a few light sprays and spread with a single pass of the tool or a conditioning pad; avoid puddling. A thin film is almost always more effective than heavy application.

  4. Work and monitor — perform controlled, repeatable strokes; stop and inspect when cutting rate or finish changes. Reapply only when the plate begins to glaze or finish degrades.

  5. Final clean — after finishing, wipe or rinse per product guidance to remove carrier residue and prevent contamination of subsequent operations.


Performance monitoring & KPIs

  • Cutting efficiency / material removal rate (MRR) — track MRR before and after emulsion use to quantify productivity gains.

  • Surface roughness (Ra) — measure Ra or visual gloss to validate finish targets.

  • Tool life / edge retention — compare life cycles of tools finished with emulsion versus alternative methods to quantify cost benefit.

  • Downtime & maintenance frequency — track how often plates require dressing or cleaning.


Safety, storage & environmental notes

  • Use PPE (gloves, eye protection) and work in ventilated areas.

  • Follow the product SDS for handling, first aid and disposal.

  • Store upright in a cool, dry place; observe manufacturer shelf-life recommendations.

  • Dispose of used emulsion or contaminated rags per local regulations — do not pour into drains unless the product SDS explicitly permits it.


Packaging

Diamond Emulsion Sprays Packaging


Diamond-Emulsions-packing



Diamond Sharpeners  Inner & Retail Packing

HUAYIDA diamond sharpeners are packaged for retail and distribution before they go into the master cartons:


1. Poly Bag “Hang-Pack” Style

  • Clear Sealed Sleeve

    • Each flat, rectangular diamond sharpener is slipped into a transparent polyethylene bag

    • Top of bag is heat-sealed with a punched hang-hole for peg-board display

  • Protection & Visibility

    • Simple, cost-effective packaging keeps the abrasive surface clean and protected

    • Buyers can immediately see the grit surface and tool dimensions


2. Blister-Style Clamshell (Bulk Insert)

  • Tray & Clamshell Design

    • Multiple sharpeners nestle into molded plastic trays (often navy blue)

    • Tray plus clear plastic clamshell is hinged or friction-locked—ideal for box consolidation

  • Stacked Bulk Presentation

    • Trays are stacked side-by-side inside a larger shipper box

    • Enables easy pick-and-pack for e-commerce or pro-shop bulk orders


3. Branded Blister Card Packaging

  • Retail-Ready Blister Card

    • Full-color printed cardstock backing with “HUAYIDA”or your branding, custom design for your needs

    • Blister bubble firmly holds the tool body—including ergonomic handle or plastic grip

  • On-Card Information

    • Product name (“Diamond File” / “Diamond Sharpener”), grit rating, and QR-code or icon call-outs for “Professional Finishing Accessories”

    • Clear “Made in China” and handling icons printed on the back


4. Blister Card with Custom Handle Style

  • Ergonomic Handle Packaging

    • Diamond sharpening rod with molded white-and-black handle is mounted on a hang-card

    • Card front features “DIAMOND SHARPENER” in bold lettering and grip-enhancing iconography

  • Retail Shelf Impact

    • Bright, contrasting card colors and graphic stripe draw attention on crowded peg-boards

    • Hang-hole or euro-slot makes it compatible with standard hardware-store fixtures


Key Takeaways

  • Versatility of Formats: From plain protective poly-bags for cost-sensitive distribution, to eye-catching retail blister cards for end-customers.

  • Protection & Branding: Every sharpener arrives clean, scratch-free, and clearly branded—with all necessary product data on the card or bag.

  • Streamlined Fulfillment: Inner trays and stacked bags simplify order picking and restocking at both wholesale warehouses and retail outlets.

Feel free to let me know if you need dielines, print specifications, or artwork mock-ups for any of these packaging formats!




Diamond Sharpening Paper Box Packaging



HUAYIDA’s sharpeners packed in sturdy, export-ready corrugated master cartons. Key packaging details include:


Heavy-Duty Corrugated Cartons

    • Made from double-wall kraft board for enhanced crush resistance

    • Uniform light-brown exterior, ideal for bulk shipping and warehouse stacking


Printed Product Information

    • Model or item number (e.g. “10448”)

    • Quantity per carton (e.g. “24 pcs”)

    • Color designation (e.g. “Black”)

    • “MADE IN CHINA” origin marking

    • Bar-code and handling icons (this side up, fragile, keep dry)

    • Clear black-ink legends on each carton:

    • In some cartons, “Trade One” or “SureCatch” branding appears, indicating either co-pack or partner distribution labels


Secure Closure & Strapping

    • Cartons are sealed with heavy-duty brown kraft tape

    • Multiple poly-strapping bands wrap around cartons vertically and horizontally to prevent shifting in transit


Pallet-Ready Configuration

    • Cartons are uniformly sized and neatly stacked, designed for easy palletizing and fork-truck handling

    • Consistent carton dimensions simplify warehousing and automated conveyor systems


Compliance & Traceability

    • Each master carton includes handling symbols (umbrella for moisture protection, arrows for upright orientation)

    • Individual bar-codes on two sides ensure quick scan-in/scan-out for inventory management


Overall, HUAYIDA’s corrugated master cartons combine robust material, clearly printed product data, and secure strapping—ensuring diamond sharpeners arrive at their destination intact and ready for onward distribution.




diamond sharpeners packaging



Previous: 
Next: 

Consult Your Diamond Sharpening Stone Experts

We help you avoid the pitfalls to deliver the quality and value your fo need, on-time and on-budget.

Contact Us

   No.1 bridge, LuxiIndustrial Zone,
Niu Tang Town,Wu jin District,
Changzhou City,Jiangsu Province, China.

Products

Applications

Contact Us
© COPYRIGHT 2025 CHANGZHOU HUAYIDA TOOLS CO., LTD. ALL RIGHTS RESERVED.